Skip to Main Content U.S. Department of Energy
bammer

Carl Enderlin

Pacific Northwest National Laboratory
PO Box 999
Richland, WA 99352

Biography

Carl joined PNNL in 1991 and his research projects include experimental multi-phase fluid mechanics, numerical simulation of thermal hydraulic systems, and international collaborations for spent fuel analyses and equipment design and testing. He has worked as a technical contributor, a test engineer, instructor, and a project manager. Mr. Enderlin has performed mechanical and system design, analyses in the area of heat transfer and fluid mechanics, experimental design, data analysis, course development, and equipment evaluations. Mr. Enderlin has expertise also in flammable gas assessments and analysis for Hanford waste tanks, development of instrumentation for Hanford waste tanks, technology assessments for the DOE complex, and evaluation and consultation for waste retrieval systems proposed for the Department of Energy waste tanks.

Education and Credentials

  • M.S., Mechanical Engineering 1988 Washington State University, Pullman, Wa.
  • B.S., Mechanical Engineering 1986 Washington State University, Pullman, Wa.

PNNL Publications

2016

  • Bamberger J.A., and C.W. Enderlin. 2016. "Experimental Evaluation of Dual-Opposed Jet Mixer Pump Performance for Slurry Mixing." In ASME 2016 Fluids Engineering Division Summer Meeting (FEDSM2016), July 10-14, 2016, Washington, DC, II2, V002T10A002; FEDSM2016-7749. New York, New York:American Society of Mechanical Engineers. PNNL-SA-116470. doi:10.1115/FEDSM2016-7749

2015

  • Bamberger J.A., C.W. Enderlin, M.J. Minette, and L.K. Holton. 2015. "Approach for Configuring a Standardized Vessel for Processing Radioactive Waste Slurries." In ASME-JSME-KSME Joint Fluids Engineering Conference, Forum on Fluid Measurements and Instrumentation, July 26-31, 2015, Seoul, Korea, 2, V002T10A003. New York, New York:American Society of Mechanical Engineering. PNNL-SA-109530. doi:10.1115/AJKFluids2015-10572
  • Bamberger J.A., G.F. Piepel, C.W. Enderlin, B.G. Amidan, and A. Heredia-Langner. 2015. "Experimental and Measurement Uncertainty Associated with Characterizing Slurry Mixing Performance of Pulsating Jets at Multiple Scales." In ASME-JSME-KSME Joint Fluids Engineering Conference, Symposium on Uncertainty Quantification in Flow Measurements and Simulations, July 26-31, 2015, Seoul, Korea, 1, V001T27A002. New York, New York:American Society of Mechanical Engineers. PNNL-SA-109501. doi:10.1115/AJKFluids2015-27575
  • Wells B.E., J.A. Bamberger, K.P. Recknagle, C.W. Enderlin, M.J. Minette, and L.K. Holton. 2015. "Applying Hanford Tank Mixing Data to Define Pulse Jet Mixer Operation." In Proceedings of the ASME 2015 International Mechanical Engineering Congress and Exposition (IMECE 2015), November 13-19, 2015, Houston, Texas, 7B, Paper No. V07BT09A044. New York, New York:ASME. PNNL-SA-111566. doi:10.1115/IMECE2015-50712

2014

  • Bamberger J.A., and C.W. Enderlin. 2014. "Instrumentation to Monitor Transient Developing Periodic Flow in Newtonian Slurries." In Proceedings of the ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting and 11th International Conference on Nanochannels, Microchannels, and Minichannels (FEDSM2014), August 3-7, 2014, Chicago, Illinois, 2, Paper No. FEDSM2014-22092. New York, New York:American Society of Mechanical Engineers. PNNL-SA-102805. doi:10.1115/FEDSM2014-22092
  • Restivo M.L., M.E. Stone, D.T. Herman, D.P. Lambert, M.R. Duignan, G.L. Smith, and B.E. Wells, et al. 2014. Technology Evaluation for Conditioning of Hanford Tank Waste Using Solids Segregation and Size Reduction. PNNL-23030. Richland, WA: Pacific Northwest National Laboratory.
  • Smith G.L., C.W. Enderlin, B.E. Wells, D.E. Kurath, and K.M. Denslow. 2014. "Consensus Standardization of Slurry Simulant Development Process to Reduce Design Risk Within the DOE Complex." In WM 2014: 40 Years of Meeting Global Radioactive Waste Management Challenges, March 2-6, 2014, Phoenix, Arizona, Paper No. 14635. Tempe, Arizona:WM Symposia, Inc. PNNL-SA-99586.

2013

  • Bamberger J.A., and C.W. Enderlin. 2013. "Instrumentation to Monitor Transient Periodic Developing Flow in Non-Newtonian Slurries." In Proceedings of the ASME 2013 International Mechanical Engineering Congress & Exposition (IMECE2013 ), November 15-21, 2013, San Diego, California, 7B, Paper No. IMECE2013-65374. New York, New York:American Society of Mechanical Engineers. PNNL-SA-97262. doi:10.1115/IMECE2013-65374
  • Bontha J.R., P.A. Gauglitz, D.E. Kurath, H.E. Adkins, C.W. Enderlin, J. Blanchard, and R.C. Daniel, et al. 2013. "Experimental Challenges and Successes in Measuring Aerosol Concentrations at Prototypic Spray Conditions Encountered at the Hanford Waste Treatment and Immobilization Plant - 13327." In Waste Management Symposia (WM2013): International Collaboration and Continuous Improvement, February 24-28, 2013, Phoenix, Arizona. Tempe, Arizona:WM Symposia. PNNL-SA-92681.
  • Kuhn W.L., D.R. Rector, S.D. Rassat, C.W. Enderlin, M.J. Minette, J.A. Bamberger, and G.B. Josephson, et al. 2013. Scaling Theory for Pulsed Jet Mixed Vessels, Sparging, and Cyclic Feed Transport Systems for Slurries. PNNL-22816. Richland, WA: Pacific Northwest National Laboratory.

2012

  • Bamberger J.A., J.A. Fort, and C.W. Enderlin. 2012. "Solids Mobilization and Suspension by Dual Opposed Mixing Pumps." In Proceedings of the ASME-JSME-KSME Joint Fluids Engineering Conference, Forum on Fluid Measurements and Instrumentation, July 24-29, 2011, Hamamatsu, Japan, 2, Fora, 97-109; Paper No. AJK2011-31017. New York, New York:ASME. PNNL-SA-79642. doi:10.1115/AJK2011-31017
  • Berglin E.J., C.W. Enderlin, and A.J. Schmidt. 2012. Review and Assessment of Commercial Vendors/Options for Feeding and Pumping Biomass Slurries for Hydrothermal Liquefaction. PNNL-21981. Richland, WA: Pacific Northwest National Laboratory.
  • Meyer P.A., J.A. Bamberger, C.W. Enderlin, J.A. Fort, B.E. Wells, S.K. Sundaram, and P.A. Scott, et al. 2012. Pulse Jet Mixing Tests With Noncohesive Solids. PNNL-18098 Rev. 1. Richland, WA: Pacific Northwest National Laboratory.
  • Schonewill P.P., P.A. Gauglitz, J.R. Bontha, R.C. Daniel, D.E. Kurath, H.E. Adkins, and J.M. Billing, et al. 2012. Large-Scale Spray Releases: Initial Aerosol Test Results. PNNL-21333; WTP-RPT-217 Rev.0. Richland, WA: Pacific Northwest National Laboratory.

2011

  • Enderlin C.W., J.R. Bontha, J.A. Bamberger, and F. Nigl. 2011. "NON-NEWTONIAN FLUID CAVERN AND NEWTONIAN CLOUD HEIGHT TESTS TO CHARACTERIZE PULSE JET MIXER OPERATION." In Proceedings of ASME-JSME-KSME Joint Fluids Engineering Conference July 24-29, 2011, Hamamatsu, JAPAN, 2, 135-154; Paper No. AJK2011-31025. New York, New York:ASME. PNNL-SA-80105. doi:10.1115/AJK2011-31025

2010

  • Bamberger J.A., C.W. Enderlin, and S. Tzemos. 2010. "Air Sparging for Mixing Non-Newtonian Slurries." In ASME 2010 International Mechanical Engineering Congress and Exposition, November 12-18, 2010, Vancouver, Canada, 7, 645-651; Paper No. IMECE2010-40833. New York, New York:ASME. PNNL-SA-73895. doi:10.1115/IMECE2010-40833
  • Fort J.A., P.A. Meyer, J.A. Bamberger, C.W. Enderlin, P.A. Scott, M.J. Minette, and P.A. Gauglitz. 2010. "Scaled Testing to Evaluate Pulse Jet Mixer Performance in Waste Treatment Plant Mixing Vessels." In 36th Annual Radioactive Waste Management Symposium, (WM 2010), March 7-11, 2010, Phoenix, AZ, 2, 1405-1419. Tucson, Arizona:Waste Management Symposia, Inc. PNNL-SA-69746.

2009

  • Bamberger J.A., P.A. Meyer, C.W. Enderlin, J.A. Fort, B.E. Wells, M.J. Minette, and C.A. Burns, et al. 2009. "SCALED EXPERIMENTS EVALUATING PULSE JET MIXING OF SLURRIES." In ASME 2009 International Mechanical Engineering Congress and Exposition (IMECE2009), November 13-19, 2009, Lake Buena Vista, Florida, USA, 9, 1803-1818. New York, New York:ASME. PNNL-SA-67924. doi:10.1115/IMECE2009-12264
  • Burns C.A., R.C. Daniel, C.W. Enderlin, M. Luna, and A.J. Schmidt. 2009. Shear Strength Measurement Benchmarking Tests for K Basin Sludge Simulants. PNNL-18479. Richland, WA: Pacific Northwest National Laboratory.
  • Meyer P.A., J.A. Bamberger, C.W. Enderlin, J.A. Fort, B.E. Wells, S.K. Sundaram, and P.A. Scott, et al. 2009. Pulse Jet Mixing Tests With Noncohesive Solids. PNNL-18098. Richland, WA: Pacific Northwest National Laboratory.
  • Wells B.E., C.W. Enderlin, P.A. Gauglitz, and R.A. Peterson. 2009. Assessment of Jet Erosion for Potential Post-Retrieval K-Basin Settled Sludge. PNNL-18831. Richland, WA: Pacific Northwest National Laboratory.

2008

  • Bamberger J.A., P.A. Meyer, J.R. Bontha, J.A. Fort, F. Nigl, J.M. Bates, and C.W. Enderlin, et al. 2008. "EVALUATING PULSE JET MIXING WITH NON-NEWTONIAN SLURRIES." In Proceedings of the ASME International Mechanical Engineering Congress and Exposition, IMECE 2007, 8, 1909-1930. New York, New York:American Society Mechanical Engineers. PNWD-SA-7907.

2007

  • Bamberger J.A., L.M. Liljegren, C.W. Enderlin, P.A. Meyer, M.S. Greenwood, P.A. Titzler, and G. Terrones. 2007. Final Report One-Twelfth-Scale Mixing Experiments to Characterize Double-Shell Tank Slurry Uniformity. PNNL-16859. Richland, WA: Pacific Northwest National Laboratory.

2003

  • Enderlin C.W., G. Terrones, C.J. Bates, B.K. Hatchell, and B. Adkins. 2003. Recommendations for Advanced Design Mixer Pump Operation in Savannah River Site Tank 18F. PNNL-14443. Richland, WA: Pacific Northwest National Laboratory.

2002

  • Onishi Y., B.E. Wells, S.A. Hartley, C.W. Enderlin, and M. White. 2002. Material Balance Assessment for Double-Shell Tank Waste Pipeline Transfer. PNNL-13485-Rev. 1. Richland, WA: Pacific Northwest National Laboratory.

2001

  • Onishi Y., B.E. Wells, S.A. Hartley, and C.W. Enderlin. 2001. Material Balance Assessment for Double-Shell Tank Waste Pipeline Transfer. PNNL-13485. Richland, WA: Pacific Northwest National Laboratory.

1999

  • Shepard C.L., B.J. Burghard, M.A. Friesel, B.P. Hildebrand, X. Mouz, A.A. Diaz, and C.W. Enderlin. 1999. "Measurements of Density and Viscosity of One- and Two-Phase Fluids with Torsional Waveguides." IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control 46, no. 3:536-548. PNNL-SA-31788.

Experimental and Computational Engineering

Additional Information